Home
Illustration of AJY pulp-pump family

Pulp Pump

Pulp Pump

Transfer pulp, syrup and process wastewater.

A pulp pump for pulp, syrup and selected wastewater circulation duties.

Related resources: Chemical and petrochemical pump selection

Installation
Horizontal pulp-pump arrangement
Wet end
Material code selected for the medium
Sealing
Confirm Y / S / D seal version
Drive
Motor and coupling
Models & specifications Request a quote
Open original source PDF ↗

models

Pulp Pump models & specifications

Check model references against the original performance table, speed, materials and operating conditions.

Original catalogue model references; open source for performance data
Model referenceCatalogue scopeSpecificationsEnquiry
AJY50-6Original catalogue referenceSource PDF ↗
AJY35-6Original catalogue referenceSource PDF ↗
AJY60-12Original catalogue referenceSource PDF ↗
AJY65-15Original catalogue referenceSource PDF ↗
AJY50-20Original catalogue referenceSource PDF ↗
AJY55-25Original catalogue referenceSource PDF ↗
AJY60-35Original catalogue referenceSource PDF ↗
AJY70-40Original catalogue referenceSource PDF ↗
Showing 1–8 of 67

Original technical pages

Use the original model table with its stated speed, impeller and units. A catalogue range does not guarantee a combined operating point.

overview

Pulp Pump construction and operation

Pulp Pump: illustrative pump assembly and construction

Pulp and circulation pump

The impeller transfers energy to the liquid through the pump casing. Final selection depends on the model curve, liquid properties, sealing arrangement, drive and piping conditions.

A pulp pump for pulp, syrup and selected wastewater circulation duties.

  • Pulp, syrup and selected wastewater service
  • Rear access to the motor and rotating assembly
  • Concentration, viscosity, material and seal code need to match the liquid

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

construction

Components, materials and seals

Pulp-handling impeller concept for Pulp Pump

Pulp-handling impeller

Check concentration, viscosity and the hydraulic curve for the liquid being transferred.

Front & rear casing concept for Pulp Pump

Front & rear casing

The front and rear casing arrangement supports access to the rotating assembly.

Material & seal codes concept for Pulp Pump

Material & seal codes

Identify the exact material and Y / S / D seal version on the proposed model schedule.

Rear service access concept for Pulp Pump

Rear service access

Leave space behind the pump for motor and rotating-assembly removal during maintenance.

Open original technical reference · PDF page 6 ↗

Open original technical reference · PDF page 6 ↗

Open original technical reference · PDF page 7 ↗

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

duty requirements

Materials, sealing & duty requirements

Pulp Pump: illustrative wetted materials and sealing components

Review medium name and composition, required flow, total head, operating temperature, suction conditions, installation arrangement, power supply and drive method, materials, standards and inspection requirements, required supply scope, full chemical composition and concentration, density and viscosity, flammability, toxicity, crystallisation and volatility, design pressure and temperature, seal and flushing requirements, applicable process standard together with the liquid composition, temperature and installation. The values on a catalogue page are not a substitute for checking the selected model curve and approved arrangement.

Wetted componentsMaterial code selected for the medium
SealingConfirm Y / S / D seal version
Liquid / design limitsConfirm liquid composition, temperature, particles and operating conditions
medium name and compositionInclude this information in the duty review and model selection
required flowInclude this information in the duty review and model selection
total headInclude this information in the duty review and model selection
operating temperatureInclude this information in the duty review and model selection
suction conditionsInclude this information in the duty review and model selection
installation arrangementInclude this information in the duty review and model selection
power supply and drive methodInclude this information in the duty review and model selection
materials, standards and inspection requirementsInclude this information in the duty review and model selection
required supply scopeInclude this information in the duty review and model selection
full chemical composition and concentrationInclude this information in the duty review and model selection
density and viscosityInclude this information in the duty review and model selection
flammability, toxicity, crystallisation and volatilityInclude this information in the duty review and model selection
design pressure and temperatureInclude this information in the duty review and model selection
seal and flushing requirementsInclude this information in the duty review and model selection
applicable process standardInclude this information in the duty review and model selection

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

installation

Installation & drive arrangement

Pulp Pump: illustrative installation and drive arrangement

Foundation & piping

Check mounting, alignment, pipe supports and suction conditions. Keep pipe loads within the selected arrangement requirements.

Drive & maintenance

Confirm speed, driver, coupling or transmission and guarding. Provide access for seals, bearings and rotating-assembly maintenance.

Before installation

  • Foundation / mounting and pipe supports
  • Liquid supply and discharge connections
  • Electrical supply and maintenance access
Discuss the installation

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

applications

Typical applications

Application illustration: chemical process-liquid transfer

papermaking

For papermaking, check the applicable product curve, liquid properties, required operating point and installation geometry. Check the proposed arrangement against horizontal pulp-pump arrangement and material code selected for the medium, then verify the operating point on the selected model curve.

sugar processing

For sugar processing, check the applicable product curve, liquid properties, required operating point and installation geometry. Check the proposed arrangement against horizontal pulp-pump arrangement and material code selected for the medium, then verify the operating point on the selected model curve.

wastewater treatment

For wastewater treatment, check the applicable product curve, liquid properties, required operating point and installation geometry. Check the proposed arrangement against horizontal pulp-pump arrangement and material code selected for the medium, then verify the operating point on the selected model curve.

supply scope

Choose the supply scope for this pump

Define the pump configuration, installation interfaces, controls and documents in the quotation.

Pump assembly illustration for Pulp Pump

Pump assembly

Hydraulic end, materials, sealing and interfaces for your driver or installation.

Electric pump set illustration for Pulp Pump

Electric pump set

Pump and matched motor, coupling / transmission, base and guarding as applicable.

Installation & controls illustration for Pulp Pump

Installation & controls

Agreed supports, controls, auxiliaries, spares and technical documents.

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

manufacturing

From preparation to shipment

Foundry workers pouring molten metal into a pump-component mold

Casting of pump components

Casting produces pump components to the construction and material requirements of the selected equipment. The applicable alloy, pattern and component geometry depend on the pump family and the agreed operating conditions.

Operator working at a large machining machine in the workshop

Finish machining

Machining prepares mounting faces, bores, fits and connection interfaces for assembly. OEM parts should be reviewed against the approved drawing and revision, including the dimensions that determine interchange and installation.

Pump castings staged for manufacturing

Component handling & staging

Owner-supplied factory photograph showing pump castings staged in a work area. The exact parts and process route depend on the selected order.

Factory test-control equipment

Inspection equipment & controls

Owner-supplied factory photograph showing test-control equipment. The inspection points and acceptance records must be agreed for the selected equipment.

View manufacturing

documents

Technical documents

Model-specific documents

Request the selected model curve, arrangement drawing, materials, installation instructions and agreed inspection records.

Request technical documents

questions

Pulp Pump FAQs

How do I select a model?

medium name and composition; required flow; total head; operating temperature; suction conditions; installation arrangement; power supply and drive method; materials, standards and inspection requirements; required supply scope; full chemical composition and concentration; density and viscosity; flammability, toxicity, crystallisation and volatility; design pressure and temperature; seal and flushing requirements; applicable process standard. Review the complete duty on the applicable model curve.

Which materials and sealing can be supplied?

Material code selected for the medium. Confirm Y / S / D seal version. Confirm compatibility with the complete liquid composition and temperature.

Are catalogue model references guaranteed duty points?

Catalogue ranges summarize printed records and may combine different conditions. Check each model against its source curve and required speed.

What is included in the delivery?

Confirm pump, driver, controls, auxiliaries, spares, drawings, manuals and required test records in the agreed quotation.

enquiry

Tell us about your pump duty

Describe the liquid, required output and site arrangement so BBP can review the model and equipment scope.

  • medium name and composition
  • required flow
  • total head
  • operating temperature
  • suction conditions
  • installation arrangement
  • power supply and drive method
  • materials, standards and inspection requirements
  • required supply scope
  • full chemical composition and concentration
  • density and viscosity
  • flammability, toxicity, crystallisation and volatility
  • design pressure and temperature
  • seal and flushing requirements
  • applicable process standard

contact@bbpmfg.com
+86 182 1085 0516

Please enter your name.
Please enter your requirements.
Please enter your requirements.
Please enter your requirements.
Please enter your requirements.
Please enter your requirements.
0/5000
Please confirm that we may respond to your enquiry.