Packaged Sewer Lift Station
An integrated wastewater lifting package combining the collection chamber, pumps, discharge equipment and controls. Size the station from the incoming flow, storage requirements and downstream sewer level.
Related resources: Sewage and industrial wastewater applications
Configuration review
Specify the operating requirement before selecting a model.
An integrated wastewater lifting package combining the collection chamber, pumps, discharge equipment and controls. Size the station from the incoming flow, storage requirements and downstream sewer level.
Request a hydraulic curve, arrangement drawing, wetted-material schedule and operating instructions for the proposed configuration. Broad public ranges do not establish a combined duty point.
Request a selection reviewoverview
The impeller transfers energy to the liquid through the pump casing. Final selection depends on the model curve, liquid properties, sealing arrangement, drive and piping conditions.
An integrated wastewater lifting package combining the collection chamber, pumps, discharge equipment and controls. Size the station from the incoming flow, storage requirements and downstream sewer level.
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
construction
Define inlet elevation, working volume, level range, structural loads and access; groundwater and buoyancy require a site review.
Agree pump quantity, duty and standby sequence, removal arrangements and discharge manifold.
Coordinate check valves, isolation, level sensing and alarm access with the station layout.
Set the start/stop levels, alternation, fault handling, high-level alarm and external monitoring interfaces.
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
duty requirements
Review peak and average incoming wastewater flow, inlet and downstream discharge elevations, storage and standby requirements, groundwater, chamber dimensions and site access, electrical supply, alarms and control interfaces together with the liquid composition, temperature and installation. The values on a catalogue page are not a substitute for checking the selected model curve and approved arrangement.
| Wetted components | Chamber, pump and pipe materials selected for the wastewater and site |
|---|---|
| Sealing | Pump-specific sealing; chamber and pipe joint details agreed separately |
| Liquid / design limits | Confirm liquid composition, temperature, particles and operating conditions |
| Peak and average incoming wastewater flow | Include this information in the duty review and model selection |
| Inlet and downstream discharge elevations | Include this information in the duty review and model selection |
| Storage and standby requirements | Include this information in the duty review and model selection |
| Groundwater, chamber dimensions and site access | Include this information in the duty review and model selection |
| Electrical supply, alarms and control interfaces | Include this information in the duty review and model selection |
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
installation
Confirm excavation, foundation, groundwater, inlet elevation, covers and ventilation with the site designer.
Review pump rotation, level settings, alternation, alarms and emergency response against the agreed operating sequence.
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
applications
For municipal wastewater collection, compare peak inflow, wet-well storage and the discharge elevation. Check the proposed arrangement against below-grade or project-defined chamber with inspection and lifting access and chamber, pump and pipe materials selected for the wastewater and site, then verify the operating point on the selected model curve.
For commercial building drainage, compare peak inflow, wet-well storage and the discharge elevation. Check the proposed arrangement against below-grade or project-defined chamber with inspection and lifting access and chamber, pump and pipe materials selected for the wastewater and site, then verify the operating point on the selected model curve.
For industrial wastewater lifting, review inflow, storage volume, pump sequencing and the rising-main interfaces. Check the proposed arrangement against below-grade or project-defined chamber with inspection and lifting access and chamber, pump and pipe materials selected for the wastewater and site, then verify the operating point on the selected model curve.
supply scope
Define the pump configuration, installation interfaces, controls and documents in the quotation.
Duty and standby pumps, mounting, discharge pipework and specified valves.
Chamber and agreed internal equipment, access arrangements and control panel.
Civil interfaces, electrical connections, operating sequence, drawings and commissioning records.
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
manufacturing
Casting produces pump components to the construction and material requirements of the selected equipment. The applicable alloy, pattern and component geometry depend on the pump family and the agreed operating conditions.
Machining prepares mounting faces, bores, fits and connection interfaces for assembly. OEM parts should be reviewed against the approved drawing and revision, including the dimensions that determine interchange and installation.
Owner-supplied factory photograph showing pump castings staged in a work area. The exact parts and process route depend on the selected order.
Owner-supplied factory photograph showing test-control equipment. The inspection points and acceptance records must be agreed for the selected equipment.
Technical references
The owner-selected reference identifies the product direction. Ratings, material availability and approvals must be confirmed for the quoted equipment.
View product referenceRequest the selected performance curve, installation drawing, material schedule, operating manual and agreed inspection records.
Request technical documentsquestions
Peak and average incoming wastewater flow; Inlet and downstream discharge elevations; Storage and standby requirements; Groundwater, chamber dimensions and site access; Electrical supply, alarms and control interfaces.
Chamber, pump and pipe materials selected for the wastewater and site. Pump-specific sealing; chamber and pipe joint details agreed separately. Confirm compatibility with the complete liquid composition and temperature.
The public reference describes this product direction. Request a model-specific curve, arrangement drawing and material schedule; public range and certification statements are not model approval.
Confirm pump, driver, controls, auxiliaries, spares, drawings, manuals and required test records in the agreed quotation.
enquiry
Describe the liquid, required output and site arrangement so BBP can review the model and equipment scope.