Hydraulic end
Confirm the selected design, liquid compatibility and performance at the complete operating duty.
Vertical Sump Chemical Pump
Vertical Sump Chemical Pump
Match the pump arrangement to the operating duty.
Vertical sump pumping for chemical and process-liquid transfer.
Related resources: Chemical and petrochemical pump selection
- Installation
- Vertical sump installation
- Wet end
- Materials selected for the actual liquid
- Sealing
- Series-specific sealing to be confirmed
- Drive
- Driver above the tank
models
Vertical Sump Chemical Pump models & specifications
Check model references against the original performance table, speed, materials and operating conditions.
Request QLY model data
The brochure provides a series overview, not independently verified model tables. Request the applicable performance curve, drawing and material schedule. Shared photographs do not identify an individual size.
Request a curve & model scheduleoverview
Vertical Sump Chemical Pump construction and operation
Vertical Sump Chemical Pump
The hydraulic end is immersed in the sump while the drive remains above the liquid. Tank depth, operating levels, mounting plate and column arrangement define the installation.
Vertical sump pumping for chemical and process-liquid transfer.
- Pumping end below liquid level, with the driver above the tank
- Materials and sealing matched to the liquid
- Pump, drive, accessories and documents defined in the quotation
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
construction
Components, materials and seals
Materials & sealing
Request the series-specific material and seal schedule for the liquid, temperature and operating conditions.
Drive & support
Define drive rating, speed, mounting and maintenance access for the proposed assembly.
Connections & auxiliaries
Check pipe interfaces and define the required protection, controls and auxiliary equipment.
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
duty requirements
Materials, sealing & duty requirements
Review liquid composition, temperature and solids, required flow and total head, inlet supply and operating cycle, site dimensions and pipe connections, drive, controls and supply scope together with the liquid composition, temperature and installation. The values on a catalogue page are not a substitute for checking the selected model curve and approved arrangement.
| Wetted components | Materials selected for the actual liquid |
|---|---|
| Sealing | Series-specific sealing to be confirmed |
| Liquid / design limits | Confirm liquid composition, temperature, particles and operating conditions |
| Liquid composition, temperature and solids | Include this information in the duty review and model selection |
| Required flow and total head | Include this information in the duty review and model selection |
| Inlet supply and operating cycle | Include this information in the duty review and model selection |
| Site dimensions and pipe connections | Include this information in the duty review and model selection |
| Drive, controls and supply scope | Include this information in the duty review and model selection |
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
installation
Installation & drive arrangement
Mounting & immersion
Provide tank dimensions, mounting-plate interfaces and operating liquid levels to determine immersion length.
Shaft & motor
Review column / shaft support, driver, discharge piping and maintenance clearance. Confirm bearing-flush requirements for the configuration.
Before installation
- Foundation / mounting and pipe supports
- Liquid supply and discharge connections
- Electrical supply and maintenance access
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
applications
Typical applications
Chemical transfer
For chemical transfer, provide the complete composition, concentration, temperature and seal-utility requirements. Check the proposed arrangement against vertical sump installation and materials selected for the actual liquid, then verify the operating point on the selected model curve.
Tank transfer
For tank transfer, confirm the operating liquid levels, mounting geometry, immersion and removal access. Check the proposed arrangement against vertical sump installation and materials selected for the actual liquid, then verify the operating point on the selected model curve.
Process liquid transfer
For process liquid transfer, provide the complete composition, concentration, temperature and seal-utility requirements. Check the proposed arrangement against vertical sump installation and materials selected for the actual liquid, then verify the operating point on the selected model curve.
supply scope
Choose the supply scope for this pump
Define the pump configuration, installation interfaces, controls and documents in the quotation.
Pump assembly
Hydraulic end, materials, sealing and interfaces for your driver or installation.
Electric pump set
Pump and matched motor, coupling / transmission, base and guarding as applicable.
Installation & controls
Agreed supports, controls, auxiliaries, spares and technical documents.
AI-generated family illustrations. The selected configuration follows the agreed model and drawing.
manufacturing
From preparation to shipment
Casting of pump components
Casting produces pump components to the construction and material requirements of the selected equipment. The applicable alloy, pattern and component geometry depend on the pump family and the agreed operating conditions.
Finish machining
Machining prepares mounting faces, bores, fits and connection interfaces for assembly. OEM parts should be reviewed against the approved drawing and revision, including the dimensions that determine interchange and installation.
Component handling & staging
Owner-supplied factory photograph showing pump castings staged in a work area. The exact parts and process route depend on the selected order.
Inspection equipment & controls
Owner-supplied factory photograph showing test-control equipment. The inspection points and acceptance records must be agreed for the selected equipment.
documents
Technical documents
Source catalogue
Original catalogue / brochure reference. Review the applicable model, version and units.
Open original PDFModel-specific documents
Request the selected model curve, arrangement drawing, materials, installation instructions and agreed inspection records.
Request technical documentsquestions
Vertical Sump Chemical Pump FAQs
How do I select a model?
Liquid composition, temperature and solids; Required flow and total head; Inlet supply and operating cycle; Site dimensions and pipe connections; Drive, controls and supply scope. Review the complete duty on the applicable model curve.
Which materials and sealing can be supplied?
Materials selected for the actual liquid. Series-specific sealing to be confirmed. Confirm compatibility with the complete liquid composition and temperature.
Are catalogue model references guaranteed duty points?
This page has no independently verified numerical model schedule. Request the applicable model table and curve for the proposed configuration.
What is included in the delivery?
Confirm pump, driver, controls, auxiliaries, spares, drawings, manuals and required test records in the agreed quotation.
enquiry
Tell us about your pump duty
Describe the liquid, required output and site arrangement so BBP can review the model and equipment scope.
- Liquid composition, temperature and solids
- Required flow and total head
- Inlet supply and operating cycle
- Site dimensions and pipe connections
- Drive, controls and supply scope