Vertical Multistage Pump

This source covers related versions. Model codes retain the printed notation; confirm the applicable series and curve.

QDL and QDLS share the supplied catalogue. The model index retains the catalogue codes; confirm the exact nameplate, hydraulic table and material version.

Non-self-priming vertical multistage pump

The pump is installed vertically in the pipe system. Verify the flange arrangement, inlet conditions, motor access and support loads against the selected drawing.

A non-self-priming vertical multistage pump for clean-liquid boosting, transfer and water treatment.

• Non-self-priming vertical multistage construction
• Coaxial inlet and outlet arrangement
• Liquid must be free of solids and fibres and compatible with the selected materials

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

Multistage hydraulic stack

Select the stages and impeller combination from the applicable QDL/QDLS table.

In-line connections

Coaxial inlet and outlet connections support a compact vertical installation. Confirm the flange dimensions.

Materials & sealing

Choose materials and the standard or high-temperature arrangement for the actual liquid.

Motor & protection

Direct coupling links motor and pump shafts. Dry-run, phase-loss and overload protection require an agreed configuration.

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

Review medium name and composition, required flow, total head, operating temperature, suction conditions, installation arrangement, power supply and drive method, materials, standards and inspection requirements, required supply scope together with the liquid composition, temperature and installation. The values on a catalogue page are not a substitute for checking the selected model curve and approved arrangement.

Wetted components	Wetted materials selected for the liquid and temperature
Sealing	Seal and temperature version to suit duty
Liquid / design limits	Clean liquid, without solids or fibres
medium name and composition	Include this information in the duty review and model selection
required flow	Include this information in the duty review and model selection
total head	Include this information in the duty review and model selection
operating temperature	Include this information in the duty review and model selection
suction conditions	Include this information in the duty review and model selection
installation arrangement	Include this information in the duty review and model selection
power supply and drive method	Include this information in the duty review and model selection
materials, standards and inspection requirements	Include this information in the duty review and model selection
required supply scope	Include this information in the duty review and model selection

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

Vertical in-line arrangement

Check flange positions, mounting, pipe supports and the available inlet supply against the selected drawing.

Motor removal & protection

Allow overhead maintenance clearance and specify power supply, controls and required protection functions.

Before installation

• Foundation / mounting and pipe supports
• Liquid supply and discharge connections
• Electrical supply and maintenance access

Discuss the installation →

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.

Pump assembly

Hydraulic end, materials, sealing and interfaces for your driver or installation.

Add to enquiry →

Electric pump set

Pump and matched motor, coupling / transmission, base and guarding as applicable.

Add to enquiry →

Installation & controls

Agreed supports, controls, auxiliaries, spares and technical documents.

Add to enquiry →

AI-generated family illustrations. The selected configuration follows the agreed model and drawing.